January 31, 2013

Oscillating measuring systems DVO 2- ODAC® – THE solution for sector cable measurement!

Already the first generation of our oscillating devices dwarf all static solutions in the shade. The second generation of our DVO systems brings further increased flexibility.
With a DVO 2 system, the detection and evaluation of all critical parameters such as height, width, minimum and maximum is easy, regardless of the cable shape or the profile.

 

DVO 2 – Your benefits at a glance:

• Best price-performance ratio
• Flexible applications
• Reliable, precise measuring results
• Simplest operation
• Swiss quality
• Local customer service

Measurement principle:

The ODAC® measuring head, mounted on the pivoting support DVO 2, oscillates continuously within +/- 50° (adjustable) around the product at cycle times between 2.6 and 45 seconds. The DVO 2 units can be installed before and after the extruder to enable calculation of wall thickness coating of an extruded / coated product.

 

The solution for following applications:

Sector cables
• All angle variations: 60°, 90°, 120°, 180°, etc.
• Straight, any orientation
• Pre-spiralled
• Measured dimensions: height and width

Round products

A 2 or 3 axis measurement allows the capture of all dimensions within the oscillation angle, including average, ovality, minimum and maximum values.

Flats, squares and profiles

A 2 or 3 axis measurement allows the capture of all dimensions within the oscillation angle, including average, ovality, height, width, minimum and maximum values.

Leave a Reply

Your email address will not be published. Required fields are marked *

*